GetPopularSoftware

This is so annoying. Ever since I built this PC in May, ANY sort of bump to my desk or case freezes up my entire PC. The screen stays on but literally freezes in place and requires me to reboot. Just now I flicked my case EXTREMELY lightly to test if it would freeze and it did. I cannot stress how sensitive it is and I have no idea why. I have a 3.8ghz overclock on my CPU which has been very stable but I don't know if it would have anything to do with this. Specs: Operating System Windows 10 Pro 64-bit CPU Intel Core i5 7600K @ 3.80GHz 34 °C Kaby Lake 14nm Technology RAM 16.0GB Dual-Channel Unknown @ 1066MHz (15-15-15-36) Motherboard Gigabyte Technology Co. Ltd. Z270X-Ultra Gaming-CF (U3E1) 28 °C Graphics 2778X (2560x1440@75Hz) VE228 (1920x1080@60Hz) ASUS VW193T (900x1440@60Hz) 4095MB NVIDIA GeForce GTX 1070 (Gigabyte) 49 °C Storage 111GB OCZ-AGILITY3 (SSD) 30 °C 111GB SanDisk SDSSDA120G (SSD) 17 °C 1863GB Seagate ST2000DM001-9YN164 (SATA) 33 °C Optical Drives No optical disk...

If the FCC gets its way, which seems likely even with the large backlash, will we be able to turn on our VPNs and bypass any ISP slowdowns or restrictions? Submitted December 01, 2017 at 09:19AM by OneMintyMoose http://ift.tt/2i5V5gC

I connected my Macbook (running High Sierra) to my samsung tv and it would only display 4k at 30Hz which looks very weird. I bought a thunderbolt 2 to hdmi converter which would go into my macbook and then the hdmi cable would go from the adapter to the tv. I was hoping this would give me a 4K 60Hz display but for some reason my Macbook and my tv are unable to detect each so I can't see anything. What should I do??? Submitted December 01, 2017 at 06:53AM by GrayFox248 http://ift.tt/2AusXhN

I bought a new SSD because my current SSD was only 500 GB and I needed more storage. I wanted to clone my old SSD on to my new 1 TB SSD so that I could use that as my main drive and use the 500 GB one as just a storage drive for Misc. user data. I don't know very much at all about setting boot drives or what is required but I had a few questions. In this screenshot from AOMEI Partition Assistant you can see on my old drive there is a partition that is labeled as "system" and one labeled as "boot." I am guessing that the "boot" status will switch over when I set the new drive as the boot drive but I am concerned about the "system" status. Does that need to be changed and if so how do I do it? Submitted December 01, 2017 at 07:10AM by dolphinflip http://ift.tt/2ivjyzR

an old zenbook asus ux21e, windows 10 i tried reinstall windows several times, i bought a new battery too an i cleaned the mobo and put new thermal paste and checked the charger port for dirt, but it still says its connected to a charger even though the battery % slowly goes down, what could be the problem? Submitted December 01, 2017 at 06:58AM by Mr-frost http://ift.tt/2ke0R3V

Hello. I'm currently trying to diagnose the problem and need some advice. Bluetooth seems to break at times when I play. Then all inputs that were currently being sent by the controller just accumulate for a second and then... there's chaos, because it's like someone just grabbed your controller and pushed several buttons at random. I've bought these console 2 years ago in a fairly good state even though it was used. The issue didn't appear at first, but now it's more annoying then ever. I've only used the controller I got with the console and it did sustain some damage due to falling, also since I bought it the joysticks seem "lazy" and the touch screen loudly clicks whenever I press it. The console itself doesn't appear to have any serious issues. Could the issue appear within the PS4 itself or within the controller? I personally believe that it's the controller, but I don't know how prone to ageing the Bluetooth receiver in PS4 is. ...

I have an Inspiron 7567 with Windows 10 and ever since I got it i have been getting bluetooth problems, specifically with the audio, like through headphones or bluetooth receiver to speakers. basically whenever I play any type of audio, youtube, itunes, etc. it plays normally but then and now the audio stops and continues playing. not necessarily pausing the audio, just the speakers/headphones themselves stopped then came back on. also it usually distorts or pops the audio after it stops then continues to play normally. also whenever i switch back to the laptops speakers, the problem never happens, so i figured the problem is with bluetooth devices. the only other thing I have constantly connected is my wireless mouse. its really a mystery whether or not its gonna happen after every session using my laptop. Submitted December 01, 2017 at 05:05AM by matthiasetc http://ift.tt/2kaLyJd

As the title says. Ran the Dell BIOS update .exe, and as soon as my PC restarted, it died. Black screen, constant beeping (short beeps) and nothing works. Tried doing the CMOS jumper reset, unplugged the battery for 2 minutes, held the power button with all power disconnected for 60+ seconds. It's not posting no bios menu. Nothing Am I SOL? Submitted December 01, 2017 at 05:24AM by cbech http://ift.tt/2BzoKqO

Whenever I have a video or stream open my League game starts to stutter. I've tried both chrome and firefox with the same problem. It's not the computer specs, and I think it might be related to Nvidia software? I did not have this problem on my old computer. edited: I dont seem to overload the CPU either. No hardware seems to be running at full. Seems like a program might be the problem. I've tried running both in fullscreen and windowed, problems persists. Submitted December 01, 2017 at 06:18AM by TheMaxCape http://ift.tt/2Av3MLW

So the rear audio port for speakers is not working and neither is the front port. When I plug either my speakers or headphones into either port nothing is showing up. When I go into sound the Speakers option stays greyed out. It was working fine before and then yesterday I tried installing a wireless pci adapter and it hasn't worked since. Not sure what else to try. Submitted December 01, 2017 at 06:22AM by hreterh http://ift.tt/2itdjMS

Operating System Windows 10 Computer Specs (PSU, GPU, CPU, RAM, Motherboard) [Laptop] Asus-X750JB GPUs: Intel HD Graphics 4000, NVIDIA GeForce GT740M CPU: Intel Core i7-4700HQ @2.40Ghz Hard drive: ST1000LM024_HN-M101MBB, 1 TB RAM: 8 GB Check Speccy snapshot link for more info Speccy Link http://ift.tt/2At3Agp Description of problem Problem description included in pastebin link below as it was too long for reddit http://ift.tt/2iumzQA Please note again that I'm more interested in a diagnosis as to the extent of the problem than how to actually fix it, in order to know if I need to change more than just the hard drive. When this issue began About two weeks ago prior to repairing, yesterday (29th Nov) after repairing, two days after I resumed using it Recurring issue Yes Date of purchase April 2016. Computer was already 2-3 years old then Under Warranty No Cause/Steps to recreate the issue Either leave the computer running idle for a while, or randomly during n...

I have no viruses (at least I checked the best I could). I'm not sure where to go from here. Any suggestions would be appreciated. Submitted December 01, 2017 at 04:42AM by VyseTheFearless http://ift.tt/2irN9df

I updating my PC before going to sleep last night. I just turned it on and my screens has crazy colors everywhere. Everything worked as normal, the only issue is the screen looks weird. Here are some pictures: http://ift.tt/2jzr9tA How can I fix this? Submitted December 01, 2017 at 04:38AM by L3301 http://ift.tt/2i5LExK

Description of problem I currently have 2 120gb Samung SSDs that I have listed on ebay and have not been able to successful wipe them. They have been formatted and were running in a raid 0 which I think means the info was split between them. I have not had success using the Samsung magician software because it creates a bootable usb which I can't seem to boot to. The buyer is a reputable seller should I worry about my data being stolen if I sell them. Is there an easier to just wipe these drives from withing windows without going through the whole bootable usb step? Other relevant info no When this issue began week ago Recurring issue No Cause/Steps to recreate the issue n/a What I've tried so far to resolve the issue tried wiping these with the SSD software with no luck. Submitted December 01, 2017 at 02:09AM by thomasisthomasis http://ift.tt/2irUvh4

Operating System Android Phone model Essential Phone PH-1 Jailbroken, rooted, or modified No When the issue began November 29 2017 Recurring issue Yes Under warranty Yes Description of problem http://ift.tt/2iuiXOu I just got this phone yesterday and I have noticed that this blue pixel pattern appears over most light colours in any app. I notice it on app icons, in YouTube videos, on photos etc, and it is not due to an oleophobic layer on the display or due to the colour simply being present in the photo as I tested on other devices and it looks fine: http://ift.tt/2AuhpuW . Cause/Steps to recreate the issue Tried same image on separate devices, tested different colours, tested different apps. Same results. Goes away if the image is tinted slightly but brightness appears to have no impact. What I've tried so far to resolve the issue Tried to adjust display settings but there are no settings to change that help. Contacted Essential support and am awaiting a respon...

I logged into the Xbox App to disable GameDVR on my sister's W10 computer, and when I made the new Microsoft account, it apparently decided that was also going to be the new Admin account for the entire OS. Now it's forcing her to log in with my Microsoft account info when Windows boots up, and all her previous settings and shit are bound to my Microsoft account. We don't even want a log-in password on that computer to begin with, since it's a bloody Desktop. Who the fuck thought it was a good idea to do this without prompting the user? Is there anything I can do to change this? I tried making a new User Account, but that forces her to start over with basically a blank OS. Submitted December 01, 2017 at 02:18AM by moal09 http://ift.tt/2ArbLtv

I recently purchased a new HP Omen 25" monitor from Ebay during Cyber Monday for $160, and I just received it today; however, it does not work. I tested the HDMI cord - it was fine; I tested the monitor on another device - it was fine. I believe it is my computer that is the issue as it does not see the monitor. I assume my computer defaults to recognising VGA, but I am not sure. Is there anyone able to help me? Submitted December 01, 2017 at 03:10AM by KingTsunam1 http://ift.tt/2iuy0rN

I have an older model iPhone for a backup/work phone, and when I logged into my email on the email app it made me go into my email, and “enable not secure apps”. I did it, because I trusted Apple with my information as most people would. Now fast forward a day I get this weird email that’s obviously someone trying to catfish me. I never usually get spam not counting ads from big companies like Walmart. Was there a huge security flaw in the older iPhone email app that I just screwed myself over with or am I just being paranoid? Submitted December 01, 2017 at 03:12AM by xaaatdt http://ift.tt/2j5b6nH

Hey folks, I was wondering if any of you have any sage advice or a direction you can point me in for solving this problem: Dealing with Windows 10 at the workplace is not a huge issue most of the time, but many members of my family have Windows 10 Home Edition on their systems at home. Every time Microsoft puts updates, usually on patch tuesday, it absolutely kills my home network. I mean that every iota of bandwidth is just sucked up, sometimes for an entire day or longer. Changing to a better router that can handle QOS is not an option (for good reasons I won't go into here). Upgrading them all to Professional Edition in not an option because of cost and my own time/sanity. I've made some valiant attempts at playing around with plenty of registry keys, but I just haven't found a combination that really works. I've been able to move the download from the Delivery Optimization service to BITS, but BITS still seems to grab up alot of bandwidth when its wants it. The...

a few things: based on my research of this issue the ssd has disconnected from the other circuits n shit inside the laptop, however this doesn't show when i open it up. I get errors like "boot device not found", "please install an operating system on your hard disk", "there is no hard disk installed" when messing around in BIOS/UEFI i am willing to buy a new internal SSD but i am slightly worried I wont know how to put it in etc etc i am working off of a linux usb currently, so I am quite certain it is the ssd that is the issue, everthing else about the computer seems fine Submitted December 01, 2017 at 02:41AM by cybernemesis http://ift.tt/2keAn2p

Previously I had a faulty RAM stick and sent it in to have it replaced. I got it replaced and plugged the new one in, but for some reason my system can still only run 3.98 GB of RAM. I'm running 64-bit Windows and I already checked msconfig, maximum memory is unchecked and always has been. I ran memtest86 and got no errors so I know it's not the RAM itself. Any advice? Submitted December 01, 2017 at 01:51AM by Giveaway412 http://ift.tt/2BAY2hq

Hey, Here is a screenshot of my BIOS: http://ift.tt/2BxDmXM Yesterday I was having trouble getting my SSD drive to work but somehow it started working without issues for no apparent reason. Only thing that I find strange is that it does not show up on the BIOS slot list, despite the fact that it does show on the boot menu on the right and I can load the OS installed in it just fine. I have the latest BIOS version on ASUS site. Submitted December 01, 2017 at 02:33AM by lfcmc http://ift.tt/2kcwoDw

Ie, let's say I search for: foo bar bat baz Google decides to show me results for: foo bar bat and leaves baz out. Well, baz was absolutely crucial for my search, and I can't figure out why I'm getting tons of irrelevant results until....oh. It was trying to be "smart." The solution is to wrap each word individually in quotes, which is extremely annoying. There has to be a solution. Thanks! Submitted December 01, 2017 at 01:16AM by makhno http://ift.tt/2AtRVOs

http://ift.tt/2AspQqI Hi there, guys. So, there's an issue with a machine purchased secondhand. Before purchasing, i confirmed with the seller that the machine works. But, after i recieved it, i'm running into a bit of an error. The machine boots, but the message above is displayed. Pressing f10, f2, delete does not work. Pressing fn+f2, fn+f10, fn+delete does not work. I do get a small electronic click from inside the machine when i press some keys. The f2 and f10 keys do not click, however alt+f2, alt+f10 do click. After trying 2 different keyboards i am a bit lost on what to do next. I sent a message to the seller asking what was done to the machine. As far as I know, the only thing done was resetting windows. I have screenshots of windows running on this machine. What can I do to resolve this issue? Submitted December 01, 2017 at 01:31AM by okraHD http://ift.tt/2iq1A1v

I was struggling to find a more fitting place sorry. My univeristy is closing down my (all) alumni email addresses. I've moved most my data off but I'm concerned about my google play account since I can't find much info on how to move the apps anywhere else. Google play help was a little frustrating since I coduldn't find a contact email. Does anyone have any pearls of wisdom on this problem? Submitted November 30, 2017 at 10:07PM by Amuro_Ray http://ift.tt/2njnRzC

So I have an old iPhone 5S which I bought out right on release. I've been trying to avoid upgrading for cost reasons because I'm tight and the phone works or worked fine. Recently it has started dying at around 17% but plugging it in gets it going again. But today it literally just died in my hands at 40%, black screen, won't turn on, nothing showed on screen so I try charging it and nothing shows up on screen (usually charge icon shows). I try the reset by holding 2 buttons and nothing, I leave it plugged in for 5 minutes and come back to a still dead phone. At this point I'm pretty pissed off and decide to try a Russian repair job and whack the phone on my bedside table. And the damn apple logo appears and it turns on and seems fine now as I'm writing this. I'm guessing battery issue? My firmware hasn't been updated in awhile either so could that be an issue? I don't know, but really didn't want to have to get a new phone. Anyone know anything...

Operating System Windows 10 Model of modem, router, or other devices FIOS G1100 IP Configuration N/A When the issue began September Recurring issue Yes Date of purchase N/A Description of problem I've tried everything I can think of to port forward my FIOS G1100 router, and nothing is working. Cause/Steps to recreate the issue Open myfiosgateway.com, login, go through all normal port forwarding steps (set up port forwarding rule, then assign the rule to an IP). What I've tried so far to resolve the issue Everything that should work on a normal router. Haven't tried any fixes for a modem or modem/router combo. I suspect there's a firewall somewhere that I'm missing Submitted December 01, 2017 at 01:08AM by hatcherfan50 http://ift.tt/2zF9gjB

So I always ran two monitors and never had an issue. They were extended across both but when I clicked 'Identify' in the monitor settings, one screen would have '1' and the other would have '2'.. now however, one screen has '1, 2' and the other has nothing.. so they're both doing the same thing. I updated my AMD drivers last night since I wanted to get AMD ReLive and since then it's been like this. I'm sure people who know what I mean will be able to understand whats wrong already. Like, as I write this, I have this text box to write on my left screen but the submit button is across on the right screen when before one tab would be stuck to one screen, not stretched across both. Also, one of the monitors has gone kind of blurry since I updated. The text is kind of blurry and the colors are a little bit off. I'm using an AMD Radeon GPU. Thanks in advance for the help! :) Submitted November 30, 2017 at 10:49PM by dawgsapper http://if...

I have an AMD A-10 7850K I'm using as a processor with the APU function disabled in favor of an actual graphics card. I've now noticed my CPU clock speeds won't go above 2.33 GHz despite the chip supposed to be defaulting at 3.70GHz. I've run stress tests and tried CPU cryptocurrency mining and neither will bring my clock speed up or Task Manager utilization to 100%. I've included a screenshot while putting the CPU under load if anyone could please help me get the most out of this already underpowered chip that would be incredible. Using the same methods I tested another computer and was able to get max clock speed and core utilization. Furthermore, when the A-10 goes under load it seems to go down in clock speed despite having thermal margins of around 7 degrees celsius. Also worth noting is that Windows Task Manager utilization never goes past 50% even when core usage is supposedly at 100% according to Overdrive and CPU-Z http://ift.tt/2nifZyt http://ift.tt...

I was attempting to remove avast software with their removal tool. In order to do this, it is recommended you go into safe mode. For some reason I have not been able to enter safe mode using the typical method so I selected for Windows to boot into safe mode upon restart in the system configuration tool. I feel like that was a mistake as after I restart I only get a blank screen. My computer is on and running, but nothing comes up at all. I can't seem to boot in at all, and I can't toggle the option off in system configuration because I can't get there. Does anyone know a relatively painless solution to this problem? Any help would be greatly appreciated. Thanks. Submitted November 30, 2017 at 11:33PM by machinich_phylum http://ift.tt/2iuIaZg

Idk if specs are important for this question. I bought a Laptop like 6 months ago and never had these problems before. It's only been there since like a week. So basically whenever I open a new program or a new tab on chrome my brightness gets adjusted automatically even if I don't want to. The brightness stays the same till I open a new program/tab and then it will either get brighter or more dark. Can someone please help me with this? I've already turned off "automatic brightness adjustments" in the windows options. Submitted November 30, 2017 at 11:46PM by Zehahahahahahahahaha http://ift.tt/2zDknd0

Hi all first off ignore the user name it was just to make someone i know salty. For the past several months now i have been dealing with some weird sound issue I've never had in other PC builds before and its hurting my ears because i suffer with tinnitus. Whenever i am listening to youtube music videos i get lots of clicks / pops and distorted sounds, especially at the start of new videos a pop/click or distorted noise will always happen! (I listen to youtube playlists when doing anything on my pc) - But a new issue has been happening to me the past several months where the standard issues will happen but then my audio dies (i guess?) because all of the sudden a really LOUD ear destroying noise will happen and im forced to take off my headphones. (It sounds like a kind of static you find on old tvs when switching to another static channel) Anyway i have a few print screens i would like people to take look at: http://ift.tt/2nlNOPg and http://ift.tt/2zDkgOC on the first pictu...

hi so im trying to display my video project (which is also my final) onto a crt tv but i have no idea how. can someone help me out? i have a macbook pro running MacOS Sierra and a magnavox MSD513E. i was going to straight up buy an rca to usb adapter hoping that would work but i think it only works for camcorders. ive been watching some tutorials but they are overwhelming me. i hope i can get this done today thanks! Submitted December 01, 2017 at 12:23AM by ilovewater86 http://ift.tt/2zFNU5C

I am happy and excited to announce that Diane Bryant, former Group President at Intel, will be joining Google Cloud as our Chief Operating Officer. I can’t think of a person with more relevant experience and talents. She is an engineer with tremendous business focus and an outstanding thirty-year career in technology. Most recently, Diane was head of Intel’s Data Center Group, which generated $17 billion in revenue in 2016. Over her five years as Group President, Diane expanded the business to additionally focus on pervasive cloud computing, network virtualization and the adoption of artificial intelligence solutions. Previously, Bryant was Intel’s Corporate Vice President and Chief Information Officer, where she was responsible for corporate-wide information technology solutions and services.   Diane serves on the board of United Technologies. Throughout her career, Diane has worked to mentor and sponsor women in technology. Google Cloud is the most technologically advan...

Here's a picture of what I'm dealing with - http://ift.tt/2k8HvNw I went and laid down for a couple hours and came back to this. I have 2 monitors one connected to my GTX 970 and another to the CPU. ( the one with the issue is connected to the 970 ) Things ive tried: - Tried swapping to a different cable, same problem. - I connected the HDMI from the 970 to another monitor with the original cable, No issue. - Connected the monitor with the problem to the CPU, and its fixed. But I need this monitor to be connected to the 970. So the main problem seems to be the 970 to just my main monitor, Any ideas? Submitted November 30, 2017 at 10:45PM by Dthomson15 http://ift.tt/2Bv4VAV

Operating System Windows 10 Computer Specs (PSU, GPU, CPU, RAM, Motherboard) Ram: 8GBi5-6400 CPU Speccy Link N/A Description of problem Okay, so I admit that I was installing some things when I realized something was up halfway during the boot up for an exe when my chrome page suddenly closed. I immediately closed the exe and rebooted chrome and found that I had been logged out of my google accounts and the new tab page had changed. http://ift.tt/2nghwoM I couldn't fix this so I reinstalled chrome and found that it turned up again but this time with another extension "My1tab". I am able to disable this new one but I can't find what is causing this issue.I can't find any questionable installations in my control panel and I have destroyed all traces of Google Chrome from my hard drive.Also I have found that my computer now has a back-up to windows 7... My computer was built and installed with 10 (Possible clue?). When this issue began 29/11/2017 11pm Rec...

Data Journalism—the skill of combining reporting with data—is becoming an increasingly important part of every journalist’s toolkit. That’s not just anecdotal: a recent study commissioned by the Google News Lab found that half of all news outlets have at least one dedicated data journalist. So, for the seventh consecutive year, we’re proud to support the 2018 Data Journalism Awards . These are the only global awards recognizing work that brings together data, visualization and storytelling. It’s a part of our commitment to supporting innovative journalism around the world. Data journalists, editors and publishers are encouraged to submit their work for consideration using this form by March 29, 2018. But don’t get too comfortable with that deadline, early applications are encouraged. Last year there were 573 entries from 51 countries across five continents. Past winners of the $1,801 prizes include include BuzzFeed, The Wall Street Journal, The New York Times, FiveThirtyEi...

So I was dumb and didn't turn my computer off before flying, and ever since then, my computer will sometimes lock up and start getting this weird darkness spreading from the left-hand side of the screen. Picture when it's fully spread I know it's a hardware issue because when I tap my computer on either side of the trackpad (where the harddrive is) it will unfreeze and the darkness will go, but until I restart the computer, the screen flickers. I've taken out the hard drive and just sprayed down the area with air and tried cleaning the connections and making sure the harddrive was in securely, but the problem still persists. I guess I want to know if it's as simple as a busted harddrive that I can just replace by myself, or some other problem I don't know. Thanks a bunch. Submitted November 30, 2017 at 10:31PM by Lieutenant_Crunch http://ift.tt/2AhsVcG

So, I thought I was crazy at first (well, I am crazy) but then it kept happening. If my xbox is off, and I plug a HDMI from my TV into my main monitor port.. The xbox comes on. Every time. This didn't always happen, and I don't know what's changed to make it happen. It's fucking weird. Submitted November 30, 2017 at 08:16PM by TheDarkness3 http://ift.tt/2AhsSxw

I'm trying to connect my PC to the networks server and I'm having minimal success. The PC recognizes the Server in the Network Tab and when I go into the tab I can access a set of public folders on the server that has been preset. However, with the files I've tried to share over the network I get a pop-up message that states I don't have permission. I've set the shared settings to all of the same users that have access to the Public folder and set the security to allow everyone on public and private networks with no passwords. Both computers firewalls are down and I can ping them from each other. What the hell is my problem? Thanks in advanced, this is for work and I've been trying to get this working since yesterday. Submitted November 30, 2017 at 08:31PM by t3inoob http://ift.tt/2AkCHbP

Whenever I send my Windows 7 computer to sleep/hibernate for the first time, it will act normally. It goes straight to sleep if I have hibernation turned off, or goes into hybrid sleep if I have hibernation turned on. Waking works normally. However, on the second time, the computer will not go to sleep. It sits and spins for about 5 minutes before throwing a BSOD and shutting down. My only workaround is to shut down instead of sleeping on the second time. This has happened ever since I built this computer. Here's the odd thing, though - a few months ago I had one good streak where I could send my computer to sleep consistently, with no hardware changes. Eventually it did crash again, but I didn't save the dump before I ended up cleaning them out. What I've done Here's my BlueScreenView entries. For all entries, the crash address is ntoskrnl.exe+6f4c0. Ran memtest - all of my memtest tests came away clean. I used my Win7 installation media to try and repair...

Essentially I am working for a company abroad, and the accommodation internet is awful. The company internet needs to allow access from their side (they have some sort of wait list for devices that are trying to access I guess), but in my room is a router since I'm in a high ranking employees room since he is on leave. My question is, if I bypass their waiting list (or whatever, I don't know if there is a technical term), will it get flagged as an attack or something? P.S. I'm really not that savvy with this stuff so sorry if I murdered this explanation of the issue. Submitted November 30, 2017 at 08:44PM by Flowers-are-Good http://ift.tt/2nlo1Xs

Every time I boot my computer up, all but 2 (mouse and keyboard) USB ports are not functional. I found a temporary solution online where I have to manually uninstall every USB host driver in device manager and then restart, but even that only works until I reboot, and I'd like to not have to do that every time I boot my computer up. If anyone can offer help or any possible solutions it'd be greatly appreciated. Thanks! Submitted November 30, 2017 at 09:05PM by Elkvomit http://ift.tt/2Ah4xI3

Hello Redditers, My Samsung Grand 2 started doing some funny business like lowering volume by itself, showing that the headphones are connected although their not, and that's about it. I decided to factory reset it, and one week later it is still showing the same screen every time I boot it up. I have tried every single way of recovery but they all didn't work. Here is what I did: I removed the battery, I turned it off normally, I turned it off removing the battery, I booted it clicking some buttons like volume down, and I have tried connecting it to my computer(It didn't detect the phone). Thanks. Submitted November 30, 2017 at 08:17PM by MeqDial http://ift.tt/2zEDu6j

Operating System Windows 10 Computer Specs (PSU, GPU, CPU, RAM, Motherboard) http://ift.tt/2zEDpQ3 Speccy Link N/A Description of problem Hello :) I have been having some issues with firefox randomly starting to not load some sites properly.Most sites are like this: (reddit as an example) http://ift.tt/2nfWxT2 will load like this, but nothing else will load http://ift.tt/2zEDrYb other websites, like facebook, will load some of it - but not load any pictures Submitted November 30, 2017 at 08:21PM by Facerollerx http://ift.tt/2nfWzdC

I don't know if this is the place to ask this but I tried to install kali kinux on my usb drive sometime back only I did the installation as per some youtube videos (ignored some network problems) and the installation was fine and it restarted but then it just showd some black screen with _ . I thought it didn't work and took usb out and restarted it to run windows and now the same problem persists. What shall I do? Submitted November 30, 2017 at 08:22PM by leatherfaceworld http://ift.tt/2niMwEs

I have windows 7 on my old HDD but my new rig only supports windows 10. I can't transfer my entire HDD to the new SSD due to size limitations. Can I somehow upgrade 7 to 10 and then take that product key and use it with a fresh install of 10 on my new SSD? Submitted November 30, 2017 at 08:25PM by jackch3 http://ift.tt/2zBQN7w

Hello guys, I usually do intensive search when I have a problem, but after 2 days I've given up and here I am asking what is happening. So here is the story: about two weeks ago we installed a heat exchanger in our house (to heat the house up in winter), and right after switching it up, almost all the other devices make a high-pitch noise (computer/tv/ anything with a transformer). When we switch the heat exchanger off, the noise stops, any ideas what exactly causes that noise, voltage fluctuations or what? Submitted November 30, 2017 at 08:22PM by WexHex http://ift.tt/2niMtZi

How can you prevent the windows 10 lock screen from being changed? Submitted November 30, 2017 at 07:20PM by EternalSKY13 http://ift.tt/2irgTHe

Hello guys, I am trying to use sysprep on a computer, and i was wondering if I could put the data on a CD-RW disk. I understand that a CD-RW disk can only hold about 700MB, but, I have about ten. Could I put the data on the disk? Submitted November 30, 2017 at 06:50PM by RookieOfTheYear04 http://ift.tt/2AsAFcc

Operating System Windows 10 Computer Specs (PSU, GPU, CPU, RAM, Motherboard) psu: evga 450btGPU: GeForce gtx 1050toCPU Ryzen 1300 quadMB: Asrock AB350m pro4Ram: T force ddr4 8x2 Speccy Link N/A Description of problem I used the motherboard CD to updates my friends new build to get the LAN port working. Now the graphics are messed up. I've tried rolling back individual drivers with no success. http://ift.tt/2AqALkD When this issue began 1 hour ago Recurring issue Yes Date of purchase N/A Under Warranty No Cause/Steps to recreate the issue Driver errors? What I've tried so far to resolve the issue rolling back drivers. Updating windows and drivers. Submitted November 30, 2017 at 06:52PM by KittyCrusade http://ift.tt/2ioIuZx

Hey guys, I am trying to install the Radeon RX 580 and I'm getting no display. My old gpu is a an Radeon HD 7870 and still runs fine with my setup. I tried disabling the old display adapters and even uninstalling them. I've also tried different cables and different inputs on the card. I also reset my motherboard with no success. The power light on the card is blue and the fans are working. I'm worried the card is dead. Please let me know if there is anything else to try. My current set up is: CPU: Intel Core i7 (2nd Gen) Mobo: Intel H67 Express PSU: 580w Memory: 16Gb Old GPU: Radeon HD 5870 Submitted November 30, 2017 at 07:00PM by kneezNtreez http://ift.tt/2ir2rih

http://ift.tt/2iqJVqg please help because i can't tell the difference by the icons anymore Submitted November 30, 2017 at 04:41PM by nikolay21 http://ift.tt/2AqADl9

Noticed network performance issues, initially thought it was Apple TV or something along those lines however went to check my network monitor on main PC to find that svchost was doing insane amounts of 'receiving'. Shut off my network adapter immediately and coincidentally the network returned back to normal for all other devices. Installed and did a scan via malwarebytes - result found some .dll's for fromdocpdf, cleaned them all however its still doing crazy high amounts of receiving. Only think I recall doing prior to this happening was install virtualbox with a pfsense image. Didnt even get to fully configure it so not too sure WTH is going on. See attached for snippet of resource manager and task manager- Submitted November 30, 2017 at 03:57PM by Jorrrr http://ift.tt/2ka6K27

Operating System Other Computer Specs (PSU, GPU, CPU, RAM, Motherboard) 2 Gigabytes of Ram, Some old Motherboard, some old GPU, CPU is Intel vpro, a floppy disk drive Speccy Link N/A Description of problem The dang CPU fan ain't doing nothing. I got a Task from my Trainer to take all the parts out and put them all in again. Everything is working but the dang fan. Any idea of what to do? When this issue began After I put everything in Recurring issue Yes Date of purchase N/A Under Warranty No Cause/Steps to recreate the issue Turning the power on What I've tried so far to resolve the issue Everything that I couid think of. Submitted November 30, 2017 at 04:03PM by Rizpagius http://ift.tt/2ByIACr

I don't get it. when I stress test my cpu with prime, the max temp I'm getting is 60. but, when gaming. I'm getting temps up to 76 degrees. is this normal? I'm using dell inspiron 7559 i7 6700hq 2.5ghz (intel speed step disabled) 8gb RAM Nvidia gtx 960m Submitted November 30, 2017 at 04:26PM by Musisean http://ift.tt/2kaNVff

Operating System Windows 10 Model of modem, router, or other devices Modem is Scientific Atlanta model EPC2203Wireless Router is TP-LINK model TL-WR740N IP Configuration N/A When the issue began This month Recurring issue Yes Date of purchase 2010 Description of problem Dont have Cause/Steps to recreate the issue Dont know What I've tried so far to resolve the issue Ive tried adding my browser to my firewallMade inbound and outbound rules for the browserand disabled firewall but didnt work Submitted November 30, 2017 at 02:21PM by realsnoorly http://ift.tt/2BvR79v

HERE IS THE VIDEO Hello guys. I have pretty big problem with my notebook screen. As you can see in video, my left and right third of the screen are having problem with screening image. This only happens to my notebook screen - when I connect external screen everything is fine. This problem can be temporary "fixed" by adjusting screen angle. But this is not a solution since only a little bit of movement will bring problems back. Right now I can not take my notebook to the repair shop since I need my notebook everyday because of school. I am also pretty scared to open my notebook on my own because I do not want to screw up even more. I am pretty bad with HW but since this does not happen on external screen I assume that either cable in notebook is damaged or my screen is dying and needs to be changed. Do you have any idea what the problem might be? Can this be fixed easily at home? Notebook: Acer Aspire V15 Silver ( Intel Core i5 4210U Haswell, NVIDIA GeForce GT 840M, 8...

So i recently built a new gaming pc and ive been having issues with games crashing a few minutes into them and i cant figure it out for the life of me Everything runs fine i can use the pc for hours with no problems only seems to be having issues when i start a game up Thought it might be a dead card so i tried a buddies gtx 1060 and same thing games crash after a few minutes Ive completely wiped and reinstalled windows/drivers twice now with no luck Temperatures seem fine cpu is at 25C idle and around 30-35C under load, Gfx card 37C idle and around 60-70C under load Im out of ideas and would rather not bring it to a computer repair shop as there are no reputable ones around me and ill be off for vacation in a week PC-Specs Cpu- Ryzen 7 1800x Cpu cooler- corsair h100i v2 Mobo- ASrock X370 Taichi Ram- G.skill trident z rgb (2x8gb) 3200mhz GFX card- EVGA geforce gtx 1080ti FTW3 PSU- EVGA 850W G2 Submitted November 30, 2017 at 03:09PM by SilorianPC http://ift.tt/2BvR4KR

I recently bought a new PSU to replace my old one in my system because im upgrading my gpu but wheni put it in it didn't work my first thought was that the PSU is Brocken but it wasn't I tried it on a different system worked fine I got my old psu and put it in the system and it worked leaving me very confused if anyone could help please Submitted November 30, 2017 at 01:50PM by KiiZ1Y http://ift.tt/2ipDSSR

SFP, SFP + and XFP: What Are the Differences Submitted November 30, 2017 at 02:06PM by echobrown1 http://ift.tt/2jxOhZb

I broke SATA port of my motherboard. Is it fixable? Or I have to replace motherboard? Submitted November 30, 2017 at 02:09PM by anas3a http://ift.tt/2jxiszY

I was just watching some videos on youtube and then the internet stopped loading. At first i thought it was a router issue so i doubled checked it on my phone (with data turned off) and it worked. To my confusion i tested it with my tablet (that has no data at all) and it still worked. Then i thought it was a virus so i ran a scan and nothing came up. Then i used the windows troubleshoot and they said there was no issue connecting to the internet. To double check this i used cmd to ping a few sites and all were successful. The laptop thinks the internet is working in everyway but isn't loading any webpage. Ive been using this laptop for 8 years and never had this issue. I use avg as an antivirus and malawarebytes as a remover and never had this issue. What do you think i should do? Im using an old firefox but the internet doesnt work on my other browsers either Submitted November 30, 2017 at 02:10PM by anotherone3 http://ift.tt/2inuWNQ

Hello! Ever since the latest feature update for Windows 10, I've been experiencing periodic freezes that force me to completely turn off my machine and reboot it. Listed below are the specs for my machine: OS Name Microsoft Windows 10 Pro Version 10.0.16299 Build 16299 System Type x64-based PC Processor AMD FX(tm)-8300 Eight-Core Processor, 3300 Mhz, 4 Core(s), 8 Logical Processor(s) Installed Physical Memory (RAM) 16.0 GB DDR3 Graphics Card nVidia GeForce GTX 1060 3 GB When the crashes have happened has been variable; in one instance, upon loading Google Chrome and trying to access a website, the computer froze. It has crashed in the middle of running some gaming applications like Overwatch, but weirdly seems to crash more often when trying to boot Overwatch as well. Troubleshooting steps taken: Used Blizzard's Repair option to fix Overwatch (but the crashes still continued after, so the below steps were taken) Updated graphics drivers to latest version Double-che...

I wanted to move some folders in the C:\users*USERNAME* folder into a secondary drive using this method. I moved both the documents and desktop folder this way, and I realize now I shouldn't have done that. Whatever I add to the desktop gets added to the secondary drive, but it's not in a specific desktop folder. Does someone know how I can undo this? Submitted November 30, 2017 at 12:32PM by kabow94 http://ift.tt/2j46Uoc

Was using my computer. Turned around for a minute or so then turned back around to notice what looks like a massive condensation cloud behind the glass on my monitor. Any ideas what this could be and how to fix it? http://ift.tt/2ByCJxh Submitted November 30, 2017 at 09:19AM by chomp_chomp http://ift.tt/2k8I89X

So like it says in the title, my high school is making every student install a security certificate in order to access the wifi. From how they explained it, it seems like they will track and log everything you do when it is installed. My question is, will this certificate track everything I do even when I am not connected to the schools wifi? Like if I am sitting at home and messing around, will they still be able to see my traffic? If this is true, is there any way to get around this or protect my internet traffic? I have a windows laptop if that matters. Thanks Submitted November 30, 2017 at 09:29AM by Alpha-Clover http://ift.tt/2kbqpi6

Ive included my problems in an imgur album, i took screenshots along the way as over the course of a day my computer turned into a practically unusable mess. http://ift.tt/2inYcEq Im thinking that either my Ethernet connection is corrupted somehow, or maybe my motherboard got fried (we had a pretty windy storm while my computer was on, but no power surges/outages that I know of) One thing i couldn't get pictures of was the graphical glitches I was getting while using integrated graphics, my screen would intermittently go black and sometimes the entire screen would "shake" up and down rapidly until the screen went black again and the image would go back to normal. When i started up memtest my screen started flashing much more than before and I saw white flecks (a bit like static on a slightly worn VHS tape) but then the screen went black for about 30 seconds and now it seems fine. Submitted November 30, 2017 at 09:34AM by Ptbird1 http://ift.tt/2Ao13UF

hey guys a have a folder of 500 videos and windows explorer dont organize by duration. its weird. they are just mp4 videos. there are any software that can help me with that? Submitted November 30, 2017 at 09:05AM by legendarysnake http://ift.tt/2nhs6M0

Hi there. I'm running win10 with a 4k and 1080 monitor, the 1080 is mirrored to my TV. I have a usb wireless keyboard and I want my wife to be able to use that with the tv to essentially have her own computer on that second screen. I'd love if there were a way to do this without a VM specifically, simply because I'm worried about it eating resources. Is there? Or should I not be too worried about the performance impact? (4690k, gtx 1070, 16gb RAM) Submitted November 30, 2017 at 08:11AM by BroBrahBreh http://ift.tt/2zAstD8

Current specs: OS: Windows 10 CPU : i5-2320 @ 3.00 RAM : 6 GB HDD : 1TB HDD SSD : Samsung 850 Evo 250GB GPU : EVGA 1050 ti (single fan) PSU : EVGA 500W MOBO :generic dell motherboard The only thing I have changed in my system (as it was a pre-built Inspiron 660) are the GPU, PSU, and the added SSD. What do you guys think I should upgrade to increase gaming and just overall performance? If you need anymore information just let me know. Sorry if this is the wrong sub for this type of question. Submitted November 30, 2017 at 08:16AM by ZHodges10 http://ift.tt/2jwPD6M

Intel z370 board (Asrock) with the UHD 630 graphics driver. Problem happens on both my monitors, in windowed or full screen mode, it seems to be specific to Chrome. I've tried 2 sets of drivers for the GPU, is there a Chrome feature which causes this? Example video here. http://ift.tt/2imJddD In Firefox 57, that video is fine, in Chrome it seems to switch from a pale yellowy, to bright red oversaturated, back and forth, almost intermittantly. NOTE: The intel drivers have the "fiddle with skin tone thingo" option, unticked and disabled. Submitted November 30, 2017 at 08:19AM by derp_commander http://ift.tt/2i2BvSa

I went through the malware guide (thank you for that) and malwarebytes came up with nothing. Earlier today my computer started freezing and a ton of processes appeared in Resmon. Here is a picture of most of the processes running in resmon. I tried system restore from two points and it said it could not complete. Is this indicative of malware activity? Submitted November 30, 2017 at 04:38AM by thewindandrain http://ift.tt/2jw8X3W

http://ift.tt/2i0pVad Submitted November 30, 2017 at 06:04AM by adamd22 http://ift.tt/2jwvVI8

I recently had an issue where the keyboard on my MSI laptop stopped working. Fortunatly, it had one more week where it was under warranty, so I packed it up and shipped it off to them. I got an email today saying that they were not going to cover it because it had water damage. They sent this picture. http://ift.tt/2i2BqxQ I have not spilled any liquid on this laptop. The only thing I can think is that it was pretty humid when the laptop failed, but it seems like a laptop should be able to handle normal humidity. Is this water damage? Is there anything I can say to them to get them to cover this (as this feels like a cop out)? Are there any other options? Submitted November 30, 2017 at 07:54AM by maiios http://ift.tt/2jxitnf

Here is a demonstration. This is in FireFox 57 Noscript 10.1.3 https://www.youtube.com/watch?v=C7uvvfw7T_w Things I've done: Removed the addon and closed Firefox, reinstalled addon Uninstalled FireFox removed profile data and reinstalled. Recently had to re-isntall the OS, so this OS install is ~15 hours old. Other things to note: When the maximized window goes into windowed mode and I set a site to be trusted the settings do not save after restarting the browser. Submitted November 30, 2017 at 07:05AM by sykoticm http://ift.tt/2Bpv6YO

No text found Submitted November 30, 2017 at 07:12AM by Conkuro-kun http://ift.tt/2j1L6JU

I just upgraded my desktop with a new CPU, motherboard, and RAM. While using it I noticed the sound of a fan getting pretty loud for a couple seconds ever few minutes. After some inspection I discovered it was the CPU fan which was the culprit. Checking my temps I'm idling around 35-40°C and the temperature doesn't go up when the fan whirs up. I made sure the everything was properly screwed in so the heatsync and fan weren't loosely connected. Anyone know why this is happening and a possible fix? Submitted November 30, 2017 at 07:12AM by TaylorLeprechaun http://ift.tt/2BmZeEo

Official Malware Removal Guide by: /u/cuddlychops06 for /r/techsupport // Updated: September 20th, 2017. Changelog: 9/20/17 - Updated some screenshots, removed JRT recommendation - see below   If you suspect you are infected with Crypto malware (Cryptowall, Cryptolocker, TeslaCrypt, etc) DO NOT follow this guide! Please make a post instead. Your files are at stake.   Purpose & Scope of this Guide: This guide is designed to assist you in removing malware from an infected system that successfully boots . If your computer is completely unable to boot due to malware, please make a post, as this guide will not help you. If you perform the following steps exactly as described, this will solve your problem in over 90% of scenarios. That said, not all malware is created equal, and not all malware removal tools are created equal. The tools recommended in this guide were picked because of their high success and low failure rates, measured on a very large sc...

I have a new computer and was stuttering on games like fortnite and pubg and some others and so i thought it was my ssd so i replaced it and that wasn't the problem so i have narrowed it down to my GPU or ram or maybe motherboard but i dont really know Specs: -msi gtx 1070 -16gb 3000mhz ddr4 gskill ram -i7-7700k oc 4.6 -msiz270 gaming plus atx motherboard AND ALL TEMPS ARE NORMAL FOR CPU AND GPU also gpu is up to date in drivers Submitted November 30, 2017 at 06:26AM by GJBferk4 http://ift.tt/2iocRzd

On the manufacturers site it says that ram isn't upgradable yet, there are two slots for said ram. When I plugged in a 4Gb stick to the second slot it won't post. No Toshiba splash screen no nothing. But when I remove it, its like nothing was wrong. I heard it may be a bios issue, but I just want to run it by the "think tank" before I risk a bios update. Submitted November 30, 2017 at 06:33AM by TrustmeIreddit http://ift.tt/2nd3p3e

I was working on my schoolwork with Chrome, Movie Maker, Discord and Word open when my screen randomly turned black and beeped 4 times. I ran MalwareBytes with no avail. any help? Specs I7 5920K 16GB ddr4 GTX 1080 240GB Samsung Evo 2x 3TB Seagate Barracuda not RAID Submitted November 30, 2017 at 06:33AM by AbsoluteBoard http://ift.tt/2zzFg8V

Hey, I just bought the WH-1000XM2 from Sony. When I connect them to my laptop I can only select the handsfree output in the audio settings and the sound I get from that is horrible. When I connect the headphones to my Nexus 6P they sound high quality. Can anybody help me? Submitted November 30, 2017 at 05:44AM by Hybrixe http://ift.tt/2AJxihV

More specifically: Word 2016. I know they can probably get the open/close times of the document, everything that’s been saved, etc. Do they have access to every unsaved iteration of document recovery that word makes? Do they have logging of every keystroke made? Edit: A better question may be what can they see that isn’t on the Microsoft Office Alerts in Event Viewer. Edit 2: Currently digging in event viewer trying to learn everything recorded on here. Looks like barely anything. What data is sent over the internet from my computer about office? IT doesn’t want to answer anything about this Submitted November 30, 2017 at 05:02AM by tacobusta http://ift.tt/2kaS4zC

Hey guys, I️ have a MSI 970 gaming motherboard and whilst looking around and cleaning I️ noticed a lot of dust “stuck” to this one place. I️ look closer and there seems to be some liquid or something that dropped onto the board. It’s only on that one spot and I’m not sure what it is. The boards been fine and I’m not sure how long it was there. Just want to know what to do thanks! http://ift.tt/2AJKPpx Submitted November 30, 2017 at 05:08AM by Zyoxide http://ift.tt/2zQri6R

Just bought a new GTX 1070 ti FTW2 and I just realised my build is lacking when it comes to RAM (I have 2x4gb of DDR3)... Do you think I could just buy another 8gb (2x4gb) of DDR3 RAM to make it 16gb total? I have four slots on my motherboard and I only use two. I seriously don't know anything about computers, my friend built the one I have right now 4 years ago... My goal would be to run games like battlefield 1/far cry 5 at 1440p with good frame rates. Here's my RAM: http://ift.tt/2njQTPQ ... This is my motherboard: http://ift.tt/2AnojlF ... My CPU: http://ift.tt/2njQUmS ... My powersupply: http://ift.tt/2Ao0w59 ... If you guys could please help me build something of quality that won't destroy my wallet that would be great. I want honesty so if there's something in there that needs an upgrade just tell me. Thanks! Submitted November 30, 2017 at 05:17AM by Broutil http://ift.tt/2njQUTU

Description of problem So I'm not sure if this belongs here but I thought someone here may be able to help me out.So I picked up two 2008 Mac Pros from an electronics recycling center so that I could teach myself how to build a home media server. The intention was to install ubuntu server on one of them and use components from the other if needed. Turns out I believe the graphics cards in both are not working. Because I intend to use one of them for a server I really don't need a monitor other than to set up and do software maintenance.I was wondering If anyone knows any clever tricks to display the boot up screen so I can install Ubuntu without the graphics card.I was thinking about trying to install Ubuntu on the hard drive externally with another computer and then reinstall the hard drive but I wasn't sure if the installation would require the same hardware in both machines for this to work. Other relevant info N/A When this issue began 11/29 Recurring issue Yes ...

I used to be able to plug my iPhone until my usb port and it would automatically start to play audio, but it suddenly quit. No settings have changed and no updates have been made, cant figure it out. Submitted November 30, 2017 at 05:22AM by Shinglemedibits http://ift.tt/2nhaos0

So I stupidly bought a new processor that didn't fit my mobo. After realizing this, I put back in my old one and booted up my computer. After this, I booted up XCOM 2 (which normally runs pretty well) at an abysmal frame rate. Civ 6 also couldn't even make it past the loading screen after 5 minutes of waiting. Its temperature idles at around 40-45celcius, and jumping up to 50-65celcius in-game (XCOM). I'm not sure what could be causing this as I didn't actually change anything. My system is Windows 10 with an i3-4130 CPU @ 3.40GHz Submitted November 30, 2017 at 04:54AM by IIIlIIlIIlllIIlIl http://ift.tt/2Ap2Bh4

Hello Tech Support, I have multiple monitors used for CCTV of sewer lines. The monitors we are using require VGA/ RCA (COMPONENT)/ HDMI connections. We were using VT2216-L-22. Amazon Link: http://ift.tt/2i0R10X Anyone recommend something similar? Any help would be great, thanks! Submitted November 30, 2017 at 04:38AM by EvilNeville http://ift.tt/2jy1lho

At my job there is one computer in the back office. Yesterday as I was leaving I was asked to look at the computer because something was off with it. At first glance I instantly knew that it was a screen resolution issue. I went to go change the display settings only to find that I had 3 choices. 800 x 600, 1024 x 768, and I think the last one was 1280 x 800 but I can't quite remember. Only things I could really think to do was update the drivers and check out the settings on the monitor itself. They basically told me that it just changed randomly and no one did anything. I apologize for my lack of specifics, but given how it isn't my PC I have no idea what the specs are. It was some sort of HP monitor. Submitted November 30, 2017 at 04:40AM by SuperDropDash http://ift.tt/2jxauGO

I live in an apartment with free internet, so I only have to plug the router into the wall to receive internet. But my NAT is strict and when I go to my router settings I can't enable UPNP or port forwarding without disabling AP mode. When I do that, I am still connected to the router but no internet for some reason. Any help? The router I have is the Netgear R6400 Submitted November 30, 2017 at 04:42AM by ImBigRoo http://ift.tt/2i1XGIl

OS: Windows 10 Mouse - Razer DeathAdder Chroma Mousepad - SteelSeries QcK+ Mousepad GPU - MSI GTX 1060 6GT OCV1 CPU - Intel Core i5 i5-6402P Motherboard - MSI B150M Bazooka RAM - GeIL 8GB DDR4 (PC4 17000) I have noticed that occasionally on my PC there is a sudden slow in my mouse movement/cursor movement randomly. The first part of this video shows how, even though I am consistently turning, the mouse movement randomly slows down. https://www.youtube.com/watch?v=ue5CmXuRSls (don't mind my friend in the background). I have tried researching, but nothing is clear as to why this is happening. I checked the drivers to make sure there isn't an update that is causing the issue and they are all up to date. My suspicion is that it may be caused by heavy use of my processor. Submitted November 30, 2017 at 04:04AM by Vex1fy http://ift.tt/2AjWPLj

I have had this problem ever since the Creators Update on Windows 10. Every time I full-screen a video online through chrome on my 4K TV this green screen stretch crap happens. Please Help, it is so annoying only being able to use a 4th of the screen to watch on your big TV! HELP!!! thank you ahead of time, I have half my hair left but you saved the other half. Video Link: https://youtu.be/Xr8VBj-2g6I Submitted November 30, 2017 at 04:08AM by Iannni http://ift.tt/2Agfud0

I have a Windows 10 PC. When I power it on, I reach the login screen just fine, but once I log in. The desktop flickers between being on and black about every half second. It seems like when it flicks to black, everything just gets reset. I can open the task manager and that works correctly without flickering, but nothing else works. Here is a gif of what it looks like: http://ift.tt/2k9DWXC The closest thing I can find to what is happening to my computer is this Microsoft support ticket, which seems to suggest that I have a new app that is causing a problem, but I've deleted all the new programs I've downloaded in the last couple days and what's left is just some videogames on steam that had been updated a week ago and caused no problems then. http://ift.tt/2e1Z8XZ I can't even run an antivirus scan. If I open in safe mode, MalwareBytes won't run (it crashed the first time I got it open and hasn't been working since) and Windows Defender won't allow me...

My GPU just died while playing GTA.I don't get it.GPU usage was about 60% at 70 C all the time.Should I try to fix it,or throw it away. my old card was runing at 75-80 C and newer failed. Submitted November 29, 2017 at 11:48PM by ka15ado http://ift.tt/2AHhpsi

There is also a datarate option, which I maxed out at '10Mbit' because I thought in general that would be better. I have a tons of cassette tapes I found while cleaning out the basement, along with the original recorder. I also had a dazzle lying around so I want to digitize all the videos but I am not sure which format to use. Submitted November 29, 2017 at 10:53PM by BMANN2 http://ift.tt/2i0F7Ek

I'm on Ethernet, if that changes anything. I don't have access to the router admin page, and, ideally, I'd like to not have to reset the router. I don't really have the technical knowledge to know what I'm doing, and it will only frustrate my dad. Is there a way to change my IP to pass his blocking? Is there any way to route my bandwidth through his IP (he leaves his computer on and next to mine). Although I know I should probably handcuff him to a chair or something, but I'd like to avoid continued escalations, because it makes my dad sad that his children can't get along. Submitted November 29, 2017 at 11:04PM by DeathByAttrition http://ift.tt/2jw9fI1

All the screens I've been able to access http://ift.tt/2im9uZS I've been seeing an occasional blue screen of iqrl not less or equal to for a while, and I'm still not sure if that's what is causing this problem, but if I see any screen that gives me options, and I have to select one and hit enter, it just goes back and forth between the two options and I can't give any other inputs which is the second picture. If I try startup repair, it hangs on loading files, even if I boot from my windows 7 disk, tried safe mode, I get a single key press, then it stops registering my keyboard inputs, the keyboard light is still on though. Sorry about crappy grammar and spelling franticly typing this up on a phone. If you have any Idea what the problem is, even if it's not a solution it will help a lot. Update, plugged in one of my older drives, booted perfectly, still won't boot from install disk Update 2: unplugged my new mouse, finally got into startup repair, dunno ...

I received a Word document by email. It appeared to come from a known sender as part of a message chain that had actually occurred (i.e. the text content was legitimate). People faking senders, I catch all the time. Having the correct content threw me off and I opened the Word document. Upon closing the document, My firewall told me that Powershell was requesting internet access - which I denied, as I recognized what was going on. I deleted my temp folder contents and immediately ran a virus scan - but this isn't going to be caught. I went back into the Word document - sandboxed, this time - and I extracted the macros. I believe it creates an executable - or at least, an executable script, and then runs it. I need help determining what the final script is so that I can see what damage was done and whether there's anything left on my machine. Malware Word Macros: Public Function scala(ByVal scivolo As Integer) As String calcolo = Array("c", "a", ...

So after reading on my normal news paper about Lite coins and bit coins I search "Litecoins" In to google. I the went to the first link ( http://ift.tt/19kguuB ) that was not a paid placement. When I get on to the site I just watch the graph a few minutes befor my phone pings "New text!" With joy I open it to see (yea, I get happy when I get texts). But it's a number I have never seen (+855 1770256) and the text says "Hi (myname) Your registration approved Ride The Wave of Bitcoin and Earn 999% in no time! http://hopt.pro/ " So now I wonder how they know my name and my phone number, anyone else this has happend too? What should I do? Or is this just random timing from something else? I tried searching up the number but didn't find any answears and haven't checked the link in the text Submitted November 29, 2017 at 10:27PM by JustANinjaPotato http://ift.tt/2zP1bNJ

as the title says, for some reason my amd driver is missing the additional setting option that is supposed to be in the preference section. http://ift.tt/2AGQAV5 what i need it for is for the switchable graphics so if there is another way to do it then it would be very helpful. i have a windows 10 rx 580 the driver version is 17.11.1 and my cpu is i5 7500 any suggestion will be appreciated Submitted November 29, 2017 at 07:10PM by PerryPlay http://ift.tt/2zP19FB

Hello /r/TechSupport , I have had my computer for almost a year now, and it has worked flawlessly up to this point. All of a sudden, I am having frame stuttering every few moments in every single game, including games a potato should be able to run like ROBLOX and Euro Truck Simulator 2 (on lowest settings!). I have attempted every single fix I can find online, but nothing has worked, including forcing adaptive v-sync in Nvidia settings, cleaning the inside of my PC, running McAfee anti-virus, as well as moving the game to my SSD to make sure my HDD wasn't failing. When I monitored my computer while running a game, there were no noticeable spikes in anything when the stuttering occurs, which leads me to believe that my RAM and CPU are perfectly fine. I am at the point where I am almost giving up. While running Fraps to monitor my framerate, I noticed that what is actually happening is it is randomly dropping from 60 to 30 fps, but only for a moment. Parts: Graphics: NVIDIA GeFo...

So I've been trying to figure out how to do this, and I've seen mention of running a windows program called sysprep but that's all I've found so far. Will this work? Sorry for sounding like a total noob, all the hdds I've installed to this day have been brand new, never had to do this. Any help would be much appreciated! Submitted November 29, 2017 at 09:00PM by anotherbasichuman http://ift.tt/2BoCp37

I bought a new computer and I couldn’t fit my monitor cable in it so I bought an adapter but it doesn’t fit either even though I’m like 90% sure that it’s the same type. What do I do? The cable to my monitor is VGA and my computer only has a DVI socket. Are there different types of DVI sockets? Submitted November 29, 2017 at 09:02PM by mumschips http://ift.tt/2j1Rukv

Title. My 2nd monitor wallpaper has huge blackbars. Also tried to photoshop a pic but no luck there.... Submitted November 29, 2017 at 09:12PM by Tatux007 http://ift.tt/2Bmc5qt

As the title says, I accidentally got rid of this application and i can't seem to figure out how to re-download it. Submitted November 29, 2017 at 08:15PM by xKetsu http://ift.tt/2j37Hpo

A few years back google announced they would be making google photos unlimited for storage. My issue is that all my photos from before then are still on the old storage and are counting towards my google drive storage. Is there a way to transfer the photos over to the unlimited? Submitted November 29, 2017 at 08:19PM by george_s_4 http://ift.tt/2zOI5Y3

I just got a tower from a relative that needs to be formatted, but it has Windows Vista OS. I would like to format the hard drive but reinstall windows 7 rather than Vista. Is there any way I can do this without an installation disc or USB? Submitted November 29, 2017 at 08:24PM by BaconSteak2Go http://ift.tt/2AIf2Fy

So I just rebuilt a PC. It was my brothers. I can't get the PC to turn on for more than 2 seconds before it restarts. Now it's in this neverending circle of trying to start up. Any help? i7-4790k, Z97 extreme6 Mobo. I feel like I'm missing something simple but idk. 8 pin power is commented. The 24 pin as well. Drives are commented and I followed abyoutune video for the front panel commectors. Any idea what I can do here? Edit: Not getting far enough to hear POST beeps Turning on from the mobo instead of front panel button does the same thing. Submitted November 29, 2017 at 08:24PM by 1SingularFlameEmoji http://ift.tt/2zPglCC

No text found Submitted November 29, 2017 at 08:16PM by NerdMachine http://ift.tt/2AHSh4E

so when I turn on my PC it freeze on the windows 10 logo when I shut it down and turn it back on it says Auto Repair then jumps straight too choose keyboard layout but I can't my mouse and keyboard don't work on that screen but it does work it bios any way to fix this Submitted November 29, 2017 at 07:36PM by FFFan15 http://ift.tt/2i3cTZK

MSI Z97 Gaming 5 Samsung 850 SSD i5 4690k evga gtx 970 sc corsair cx500 Windows 10 I get the A2 error code every now and then when I try to boot up my PC. But the problem is immediately solved when I unplug my SSD from the sata port and plug it into another sata port (though sometimes I have to try multiple ports before it goes through). It's not unbearable but it is quite annoying and frustrating to have to open up my case and swap ports every time I boot my rig up. Help would be greatly appreciated! Submitted November 29, 2017 at 07:38PM by lavabean16 http://ift.tt/2jxCz10

Small home network. 3PCs (all running Windows 10), 1 WDMYCLOUD NAS. I am NOT using Homegroup, but Network. Before this, when I clicked on Network in Windows Explorer, I would get a list of connected computers/NAS underneath. (I could then click on those and browse shared folders). Since today when I click on Network that does not happen. I can still see shared Media Devices, Multifuncion Devices, Printers and Storage, but not the machines themselves. The WDMyCLoud NAS shows up as storage, but when I click on it it doesn't direct me to shared folders, but to the cloud IP address. When I type \WDMYCLOUD (or the name of one of the other 2 machines) in Windows Explorer in the address bar, I CAN connect successfully and I have access to the shared folders. Although this does work for now for trying to save and open files to shared drives I used most often (pinned to Quick access)...it's a bit of a hassle and I would like to fix this if that is possible. The other 2 computers do...

Operating System Windows 10 Computer Specs (PSU, GPU, CPU, RAM, Motherboard) CPU: Intel i5RAM: 8GBGPU: AMD Radeon 250XMOBO: Asus H97 Pro GamerPSU: Forgot Speccy Link N/A Description of problem I'm having trouble with my Internet, every few seconds, maybe 10 on average, my ping will spike to 1000ms When this issue began 2016 Recurring issue Yes Date of purchase N/A Under Warranty No Cause/Steps to recreate the issue The issue keeps cropping up every time I turn on the PC. What I've tried so far to resolve the issue , the only fix is to flush DNS by inputting the following to my command prompt:IPCONFIG /FLUSHDNSNBTSTAT –RNBTSTAT –RRNETSH INT IP RESETNETSH WINSOCK RESETand then restart my PC. After that, the spikes will stop but I have to do this every time I turn on the PC. If it's normal surfing, no problem but these ping spikes affect my gaming in multiplayer. please help. Submitted November 29, 2017 at 04:46PM by DaiwoK http://ift.tt/2jxCuue