Skip to main content

Changed out CPU cooler and now pc wont turn show signal

Title explains it all. I have a i5 6500 and was using the stock cooler. Recently bought a cryoig m9 because the cpu was getting hot while running pubg.

Installation went good, all I need was remove the RAM, take one cooler out and then put the other one in then put the ram back into its spot. Go to turn the pc on, everything is running fine, new cpu cooler is running graphics card is running except now I'm not getting a signal on my monitor?

Things I have tried have been plugging the graphics card in and out, checking the connection cables, from the graphics card to the monitor. Also tried with hdmi with the graphics card to the monitor with no signal. Tried to run the hdmi from the mobo to the monitor and that also didn't work.

Kinda at a loss here any help is appreciated. Solved: RAM wasn't pushed in all the way.



Submitted August 31, 2017 at 01:43AM by Dragonslayer287 http://ift.tt/2vtsta3
Labels:

Comments

Post a Comment

Popular posts from this blog

certain keys on my keyboard dont work when "cold"

Hi guys, i have a Lenovo Y520-15IKBN (80WK) and certain keys on the keyboard don't work (e,g,h,8,9,Fn...) but only when the weather is cold. for example in the winter it used to work after certain amount of time when i first boot the laptop and stops working when i stop using it for a while, but now that the weather is hot it works just fine except for the first couple of minutes or when its colder. of course i do realise that it has nothing to do with the outside weather but with the temperature of the computer itself. can someone explain to me why this is happening and how it should be fixed as i cannot take it to the tech service until july even though it's still under warranty because i need it for school. ps: an external keyboard works fine. Submitted April 29, 2018 at 03:35PM by AMmej https://ift.tt/2KiQg05
Post a Comment
Read more

Old PC with a Foxconn n15235 motherboard needs drivers! Help!!

So my Pc corrupted and I had to fresh install windows on it, but now its missing 3 drivers and one of them is for the Ethernet controller! I've tried searching everywhere for the windows 7 drivers but all I seem to find are some dodgey programs saying they will install it for me. Problem is without the ethernet driver I can't bloody connect to the internet. I've been using a USB to try get some drivers on there, but they just end up being useless programmes . I'm also a bit of a noob at these things, I don't understand where to find the names of things in my PC, I've opened it up but I don't understand whats significant and what isnt. If someone has the drivers and can teach me how to install them I'd be very appreciative! Submitted April 29, 2018 at 02:47PM by darrilsteady https://ift.tt/2r76xMZ
Post a Comment
Read more